10G Full Rate BERT Support code For PRBS7/PRBS9/PRBS15/PRBS23/PRBS31

Performance character:

One SFP optical channel and One electric channel, Two channels synchronous input and output, Error Code testing can be independent.

Support for continuous error detection and timing error detection.

Support Full Rate from 622M up to 11.7Gbps；

Support code type: PRBS7 / PRBS 9 / PRBS 15 / PRBS 23 / PRBS 31

One channels low jitter clock output, the optical channel and the electric channel share one clock, the two channels clock synchronization.

Communication Mode USB HID or USB-COM.

Software function introduction

• Data Rate:Setting the current data rate.
• Data Pattern:Setting then current PRBS(Pattern).
• Rx Mode: The equipment has two channels, optical channel and electrical channel, Select receive input is optical channel or electrical channel when receiving sensitivity test,SFP interface is optical channel,RX+ and RX- is electrical channel.
• Data Invert:The electrical channel input signal polarity can be setting reversed,eg RX+ to TX- and RX- to Tx+.
• Gating Time:Accumulation time setting for Accumulation BER measurement .
• Start button:Start setting the parameters and testing the Instantanceous BER and Accumulation BER.
• Refresh button: Manually refresh the accumulated BER.
• USB Address box:Automatically enumerate all USB device addresses,select a USB address and press Connect button to connected the current device.
• Instantaneous BER(bit error rate):refresh at 200ms intervals.

Accumulatio BER(bit error rate):accumulate the instantaneous bit error count and elapse time,Accumulatio BER = instantaneous bit error count/(elapse time*total bit count).

"To do import substitution, to create national brand" is the journey that Uc Instruments is brave to climb and the goal of continuous progress.

Guangzhou UC Instruments., Co. Ltd. was founded in March 2009 and has been recognized as a high-tech enterprise in Guangdong Province.

Guangzhou UC Instruments., Co. Ltd. is willing to join hands with chip manufacturers, device manufacturers, equipment manufacturers, communication operators and data centers in the optical communication industry, as well as teaching and research units in the industry, to create a brilliant industry. To provide industry users with "UC" independent brand measurement instrument products and services, and automated test system customization services.

We warmly invite customers to choose our products and services. We will try our best to do a good job in the spirit of craftsmanship in our products, with enthusiasm to do a good job in our services, and strive to become the majority of users in the field of product measurement and testing strong backing.

The full range of Youxi instrument products are:

8 series passive measuring equipment: light source series, optical power meter series, optical attenuator series, plug back loss meter series and optical polarization generator and optical switch series, etc.

9 series of active measuring equipment: BER series, optical oscilloscope series, clock recovery instrument series, LIV measuring system and 10G/100G/400G optical module test and evaluation board series.